Getting started
Putting in the batteries
Open the battery cover of the remote control and put
two AAA size batteries so that the ‘+’ and ‘-’ marks
on the batteries match the ‘+’ and ‘-’ marks inside the
remote control. Replace the battery cover.
1
2
3
Plug in and switch on
Insert the mains adapter lead into the ‘DC 12V
2.5A’ on the back of the Digital TV Recorder.
Connect the power cable into the mains adapter
and insert the plug into a mains socket. The red
standby light on the front of the Digital TV Recorder
will come on.
Switch your TV On and select HDMI.
Press the
[STANDBY]
button on your remote control.
The first time install screen
The first time installation screen will appear on
screen.
If the signal strength is above 50% press the
[OK]
button on your remote control to continue
the setup.
Follow the instructions on screen to complete
the installation.
Step 1 of 6
Step 2 of 6
Step 3 of 6
Step 4 of 6
R
Step 5 of 6
OK
Continue
WARNING
!
Make sure that your receiver has been connected correctly
before continuing the installation
If signal strength is less than 50%
please check the dish alignment and connections
Signal Strength
100%
50%
25%
75%
Step 6 of 6
First Time Installation
AAA
Battery
AAA
Battery
04
8
GD11FSRHD50 IB_Rev1 Draft 2.indd 8
GD11FSRHD50 IB_Rev1 Draft 2.indd 8
23/09/2011 11:07:52
23/09/2011 11:07:52
