8
2
3
Connecting Power
Before connecting power to the Digital Radio, check that the mains
voltage on the rating plate of the AC Adaptor is the same as the voltage
in your area.
Plug the power connector on the AC Adaptor lead into the DC IN
connector on the rear panel of the Digital Radio, see below.
Plug the AC Adaptor into the wall socket and switch the mains power on.
The unit is now ready for use.
Power
Adaptor
Mains
outlet socket
Connect power socket here
Power Control
To turn the radio on:
Slide the POWER ON/OFF switch on the rear panel to the ON position.
1.
The radio will switch on.
2.
To set the radio to Standby:
Press the
1.
STANDbY
button on the Digital Radio front panel or on the
Remote control.
The radio will set to standby. The clock will continue to run in Standby
2.
mode.
Set POWER ON/OFF switch to ON
Getting Started
03
1
2
3
4
5
6
7
8
9
1
2
3
4
5
6
7
8
9
1
2
3
4
5
6
7
8
9
1
2
3
4
5
6
7
8
9
