3. How to set loud ON/OFF (13)
Press and hold, (BND, LOU) (13) button for more than 2 seconds, until the Display
shows “LOUD ON”. Repeat again to turn LOUD off.
4. Display
Press DISP button (15) to operate as the conversion of each display mode as follows:
- In case of receiving a RDS station
In radio mode: ->PS ->CT ->FREQ. ->PTY ->
In CD (MP3) mode: ->CD (MP3) ->CT ->PS ->FREQ. ->PTY ->
- In case of no receiving CT or PTY information, the display shows as “NO CLOCK”
or “NO PTY”.
- In case of receiving a non RDS station
In radio mode: ->“NO CLOCK” ->FREQ. ->“NO PTY” ->
In CD (MP3) mode: ->CD (MP3) ->CT ->FREQ. -> “NO PTY” ->
Each displaying time is several seconds, and come back to 1’st
position after several seconds.
Notes:
- CT = clock time
- FREQ. = frequency
5. Equalization
Press
P-EQ
button (11) to turn on equalization function and to select desired audio
mode. There are five kinds of mode as below:
FLAT
CLASSICS
POP M
ROCK M
DSP OFF
6. Select Mode
Press MODE button (6) shortly to choose desired listening mode.
[e.g. radio mode to CD (MP3) mode]
The unit can be connected a portable audio player throught the AUX jack (back of the
unit).
7. Flashing Led
This LED (12) will flash when the front panel is removed.
8. Remote Sensor
Point the remote control handset to the remote sensor IR (9). Press the function keys
on the handset to control the system.
9. Reset
RESET button (24) must be activated with either a ball point pen or thin metal object.
RESET button (24) is to be activated for the following reasons:
- Initial installation of the unit when all wiring is completed.
- All the function buttons do not operate.
- Error symbol on the display.
Note: If press RESET button (24), the unit can’t work yet, please use a cotton swab
soaked in isopropyl alcohol to clean the socket on the back of the front panel.
Goodmans Product Information Helpline (02392) 391100
Installation Helpline (01132) 868613
P. 15
