P. 15
• AUXILIARY INPUT
The unit can be connected to a portable audio player through the
AUX IN
jack (24).
• FLASHING LED
If the front panel is removed from the main unit, the
LED
(25) will be flashing.
• RESET
RESET
button (26) is placed on the front panel and must be activated with
either a ball point pen or thin metal object.
RESET
button (26) is to be
activated for the following reasons:
- Initial installation of the unit when all wiring is completed.
- All the function buttons do not operate.
- Error symbol on the display.
Note:
If pressing the
RESET
button (26) fails to restore normal operation.
Try cleaning the contacts on the detachable front panel with a cotton bud
soaked in Isopropyl Alcohol.
RADIO OPERATION
• BAND SELECTION
At tuner mode, press
BND/LOUD
button (13) to select the desired band.
The reception band will change in the following order:
• STATION SELECTION
Press
MANUAL/SKIP UP
button (16) or
MANUAL/SKIP DOWN
button (17)
briefly to activate automatic seek function.
Press for several seconds until
“MANUAL”
appeared on the display, the
manual tuning mode is selected.
If both buttons have not pressed for several seconds, it will return to seek
tuning mode and
“AUTO”
appeared on the display.
• LOCAL/DISTANCE (FM BAND ONLY)
Press
LOC
button (2) to select between local and distant stations.
Local setting for reception of strong station, and a distant setting for reception
of weaker stations.
This function is operational only during AUTO SEEK operation.
• MONO/STEREO
Press
MONO
button (1) to select mono or stereo mode.
You can sometimes improve reception of distant FM stations by selection of
mono operation.
FM1
FM2
FM3
MW
LW