3
POWER SOURCES
Power connection
1.
Plug the AC 230V Power Cord into an AC
household outlet.
2.
If you want battery back up, connect the MN1604
Alkacine 9V battery (not included) to the battery
terminals of the Battery compartment.
3.
The batteries will maintain time function during
a power cut, but not display it.
4.
Normal display and function will resume when
power is restored, replace the batteries annually.
Note:
No battery is needed for normal operation.
PLAYER MAINTENANCE
Cleaning the Cabinet
IMPORTANT:
Disconnect from Main Supply before
cleaning.
Wipe with a soft cloth. If the cabinet is very dirty,
dampen the cloth with a weak solution of neutral
detergent and water, and then wipe clean.
Cleaning the Lens
A dirty lens will cause sound skipping and, if the
lens is very dirty, the CD may not work. Open the
disc cover and clean the lens as follow:
Dust Dry Particles
Using a camera lens brush/blower, blow on the lens
couple times, then wipe it lightly with the brush to
remove dust. Then, below on the lens once more.
Finger prints
If the lens cannot be cleaned by using a brush/
blower, use a dry cotton swab.
MANUAL .PMD
7/30/2003, 5:00 PM
3
