Every time the CD MODE button on the Remote Control is pressed.
The corresponding mode appears in the display window.
When shows in the display.
display. The current track on
the disc will be repeated.
When shows in the display.
All tracks on the disc will be
repeated.
NOTE: In normal mode none of the above symbols show in the display.
NORMAL PLAYBACK
Play the whole disc.
10
INTRO
Plays the first 10 seconds of each track on the disc.
When in the STOP mode press the Remote Control MODE button three times then
press the PLAY/PAUSE button to start INTRO playback.
During disc playback press the MODE button three times and then press
the back skip
button to start INTRO playback . Alternatively
INTRO will start at the end of the current playing track.
PROGRAMME
This allows selected tracks on the disc to be played in any desired order
To set the programme play
Programmes can only be set in the STOP
mode.
1. Press the Remote Control PGM/CLEAR button
when the unit is in the stop mode.
The track number and
indicator
appear in the display.
2. Press
or
to select the desired
track.
3. Press the PROG button to enter the track
into memory.
4. Repeat step 2 and 3 to programme further
tracks up to 24 tracks can be programmed
into memory.
5. Press
to start the programmed play.
6. To erase the programme, simply press the
PGM./CLEAR button for 2 seconds in the
STOP mode.
11
8. REPEAT / PLAY MODES
7. INTRO SCAN AND PROGRAMMED TRACK PLAY
9. INTRO SCAN AND PROGRAMMED TRACK PLAY
PLAY/PAUSE
3
PGM/CLEAR
1
