2
Insert an audio CD, MP3-CD or WMA CD printed side up, by pressing gently on the CD
centre so that it fits onto the hub. Close the lid by pressing down on the left side.
3
Slide CD, USB, FLASH switch to the “CD” position.
4
Press the PLAY/PAUSE button to turn the set on and the start playback. The current
track number and the elapsed playing time are displayed. It will take approx. 5 seconds
for a CD to begin playback.
•
To interrupt playback press the PLAY/PAUSE button.
The
elapsed time
flashes.
•
Continue playback by pressing the PLAY/PAUSE button again.
5
Press the STOP button to stop playback.
The total number of tracks and the total playing time of the CD are shown in the display.
6
Press the STOP button again to turn the set off.
7
To remove the CD, hold it by its edge and press the hub gently while lifting the CD.
•
When the unit is turned on, the “ESP” function is active automatically. "ESP" is
displayed. If the ESP function is not required, press the ESP button to turn it off.
Playback information
•
If a CD Rewritable (CD Recordable) is not recorded properly (finalized). “Disc Error” is
displayed.
•
For CD Audio, use FINALIZE on your CD recorder to complete the recording.
•
Playback will stop if you open the CD lid.
•
While the CD is being read, “Reading Disc” is displayed.
•
If there is no activity for 10 seconds, the set will clear the display, If there is no activity
after another 50 seconds, the set will turn off automatically to save battery power. Any
settings such as program and playing modes will be kept.
Volume and
sound
adjustment
•
Adjust the volume level up to 32 steps by using the Volume
up/down buttons.
Preset Equalizer
•
While a CD is playing, press the PROG./ EQ button to cycle though the EQ setting
(NORMAL, CLASSIC, POP, JAZZ , ROCK, BASS AND U-BASS).
Selecting a track and searching
Selecting a track during playback
•
Briefly press +SKIP / SEARCH or -SKIP / SEARCH button once or several times to skip
to the current, previous or subsequent track start.
Playback continues with the selected track.
Selecting a track when playback is stopped
1
Briefly press +SKIP / SEARCH or -SKIP / SEARCH button once or several times. The
selected track number is displayed.
2
Press the PLAY / PAUSE button to start CD play. The playback starts with the selected
track.
Searching for a passage during playback
1. Press and hold +SKIP / SEARCH or -SKIP / SEARCH button to find a particular passage
in a backward or forward direction.
Search starts and playback continues at a low volume. After 2 seconds the search
speeds up.
2. Release the button when you reach the desired passage.
Normal playback continues from this point.
Programming track numbers ( CD Only )
You can select up to 24 tracks and store them in the memory in a desired sequence. You can
store any track more than once.
1.
While the unit is stopped, press the PROG. button. PROGRAMME and " 01,02 and 03 "
are displayed.
2.
Press ENTER button. The programme list will be displayed on the screen.
3.
Select a track with SKIP+/- button.
•
Press the ENT.(ENTER) button once to store the desired track.
4.
Select and store additional desired tracks by repeating 2 to 3.
5.
Press the MENU. button after stored programming tracks.
6.
Press the PLAY button to start playback of your selected tracks.
•
You can review the programme by pressing the PROG. button when playback is
stopped.
5. PLAY MODES
4. CD PLAYBACK
4. CD PLAYBACK
