In-car use (connections supplied for GCD621K only)
Only use the car voltage converter (4.5V, DC, positive pole to the centre pin) and
the car adapter cassette included with the unit. Any other product may damage the
unit.
1
Put the CD player on a horizontal, vibration-free and stable surface. Make
sure it is a safe place, where the player is not a danger or obstacle to the
driver and passengers.
2
Connect the DC plug of the voltage converter to the 4.5V DC socket of the CD
player (only for a 12V car battery, negative grounding).
3
Insert the voltage converter into the cigarette lighter socket. If necessary,
clean the cigarette lighter socket to obtain a good electrical contact.
4
Turn down the volume and connect the adapter cassette jack plug to the
earphone socket of the CD player.
5
Carefully insert the adapter cassette into the car radio’s cassette
compartment.
6
Make sure the cord does not hinder your driving.
7
Start the CD player, set VOL to the mid position and adjust the sound with the
car radio controls.
Always remove the voltage converter from the cigarette lighter Socket when
the CD player is not in use.
Notes:
Avoid excessive heat from the car heating or from direct sunlight (e.g. in a
parked car in the summer).
6
Listening with the earhook
Connect the plug of the stereo Earhook (supplied) into the EARPHONE socket.
Caution:
Avoid excessive volume levels and listening to sound for a long period of
time when using earhook.
•
Adjust volume to the
desired level.
•
The volume can be
adjusted either on the
main unit or on the in
line volume control.
Key Lock (Hold) Function
To disable the controls on the player preventing accidental button presses slide
the Hold switch to the ON position "Hold" will show in the display if any button is
pressed to enable the use of all controls move the HOLD switch to the OFF
position.
7
To
5. EARHOOK AND HI-FI CONNECTION
4. IN-CAR CONNECTION
