Auto-set (continued)
If you do not see the auto-set picture when you switch on the
video recorder in step 2 above, your video recorder has probably
already been tuned in to some television programmes.
To start auto-set again, press the MENU button until the main
menu appears.
• Press the PR- button once. This moves the pointer to
‘PR preset’.
• Press the OK button to see the programme pre-set menu.
The pointer will be on ‘Auto Set’.
• Now go to step 3 above.
14
PR PRESET
Auto Set
Manual Set
PR Erase
PR Align
PR+/-:select
OK:confirm MENU:end
MAIN MENU
Timer Program
PR Preset
VCR Setup
PR+/-:select
OK:confirm MENU:end
MAIN MENU
Timer Program
PR Preset
VCR Setup
PR+/-:select
OK:confirm MENU:end
Manual channel search
Select the video channel on your television so that you can see the menus. See ‘Automatic
video channel selection on page 10.
In certain cases the auto-set tuning function may not be able to find all the broadcast
channels. Or you might want to set a programme number to a new piece of equipment such
as a satellite receiver. In these cases you can set programmes without using auto-set again.
(Auto-set is explained on page 13.)
1 Press the MENU button until the main menu appears.
2 Press the PR- button once. This moves the pointer to
‘PR preset’.
3 Press the OK button to see the programme pre-set menu.
4 Press the PR- button once. The pointer will move to
‘Manual set’.
PR PRESET
Auto Set
Manual Set
PR Erase
PR Align
PR+/-:select
OK:confirm MENU:end
v i d e o r e c o r d e r
Setting up the
