CANVAS2
Quick Set Up
3
Power On and Autoscan
1. Connect the power cable to the DAB Radio and mains supply, or insert 4 x AA batteries into the
battery compartment.
Note: There is not standby mode during using the battery only.
2.
3.
4.
Raise and extend the aerial.
Turn Canvas2 on by pressing the POWER button.
The first time the radio is switched on, it will start up in DAB mode. It will automatically scan
for the available radio stations.
3.1
3.2
Changing DAB Stations
In the DAB mode, the CHANNEL button allows you to navigate between different stations.
Press SELECT to choose the one you want to listen to.
3.3
Adjusting the Volume
Press the VOLUME button to increase or decrease volume respectively.
fig.2
3.3
Switching Off
The POWER button allows you to turn on the radio and switch to standby. You need to unplug
the power supply to switching off the DAB radio.
DAB/FM button
Features
4
Switching to DAB/FM Mode
1. If the DAB Digital Radio is in DAB mode, press the DAB/FM
button repeatedly until FM is shown on the display.
Once in FM mode, your DAB Digital Radio will tune to the
start of the available FM range (87.50MHz) or the last FM
station listed to fig.2.
To manually change the FM frequency, make sure that you
have not selected any other sub-menus. Turn the TUNE/
SELECT dial to change the frequency by 0.05MHz.
2.
3.
4.1
4.2
View Station Information
Press the INFO/MENU button repeatedly to display information
about the station you are on.
INFO button
4.3
Changing the DAB or FM Display Information
Press the INFO/MENU button repeatedly to display information
about the station you are on.
FM
87.50MHz
[No Radio Text]
