8
Basic Operations
Fade-out Muting (FADE)
Selecting the Preset EQ
(SOUND MODE)
The sound mode can be used to add spacial effects to the audio output.
Please note: This effect will only apply to playback not recoredings.
Press the SOUND MODE button until the Sound Mode required
is shown on the display.
The “SOUND MODE” indicator lights up in the display.
Each time you press the button, the Sound Mode changes as fol-
lows:
FLAT
=
ROCK
=
POP
=
CLASSIC
=
(back to the beginning)
To cancel the effect,
press the SOUND MODE button until
“FLAT” appears on the display.
The “SOUND MODE” indicator goes off.
Entering Numbers with the
Remote Control (Numeric Keys)
The numberical keys can be used to preset stations, recall the preset
stations, or to program CDs.
Examples:
• To enter number 5, press 5.
• To enter number 15, press +10, then 5.
• To enter number 20, press +10, then 10.
• To enter number 25, press +10, +10, then 5.
MX-KB4(J).book Page 8 Tuesday, February 24, 2004 5:10 PM
FLAT
No sound effect applied.
ROCK
Boosts low and high frequencies. Good for
acoustic music.
POP
Good for vocal music.
CLASSIC
Set for wide and dynamic sound stereo
systems.
Adjusting the Volume
Turn the VOLUME control on the Unit clockwise to increase the
volume or turn it counterclockwise to decrease the volume.
Press the button on the Remote Control to increase
the volume or press the VOLUME – button on the Remote Control
to decrease the volume.
You can set the volume level to MIN, 1-31, or MAX.
• When you turn the power off at a volume level of over 19,
the volume level is automatically set to 18 when the power
is turned back on.
For private listening
Connect a
set
of headphones to the PHONES jack.
The
sound
from
the speakers
will be automatically turned off
.
Be sure to turn down the volume before connecting or putting on
headphones.
To mut
e
the output
, press the FADE button on the Remote
Control. The output is reduced until the sound is muted.
To release muting
, press the FADE button once again.
The output is increased to the previous level.
• Turning the VOLUME control on the unit or pressing the VOLUME
button on the Remote Control will increase the volume from
the previous level.
