Setting the timer
Timer (record) stand-by on / off
T I M E R
a n d c l o c k
T I M E R
and clock
Setting the clock
Displaying the time
Setting the sleep timer
Switch off the stereo system.
Enter clock-set mode, the hour
digits flash.
Set the current hour
Store the hour digits and switch to
the minute digits.
Set the current minutes.
Start the clock and exit clockset
mode.
Set the machine to automatically
switch off after a specified time
Select the SLEEP function.
Every time the sleep button is
pressed the time is reduced from
90 minutes to 10 minutes and
then off.
The machine will show the time
for approx. 4 seconds.
16
15
Select the TIMER function.
(Timer display disappears after about 9 seconds.)
Select, if the radio, tape, CD, or a connected device should
be heard when the system is turned on.
Press repeatedly.
Enter 'on' time.
Set the hour the unit is to switch on.
Switch to the minute digits.
Set the minutes the unit is to switch on.
Switch to volume setting.
Set the volume when the unit turns on between (MIN.) 1 and
(MAX.) 28,
Switch to the time the machine is to switch off again.
Set the number of minutes the unit is to play for before
turning off.
Exit the timer setting.
Press the button repeatedly to switch below :
timer
timer record
timer deactivated
If you want to cancel the SLEEP function, press the button repeatedly
until "SLEEP" disappears from the display.
The unit can be set the machine to automatically switch
on and off and even to record at a specified time.
Be sure the clock is set accurately.
Power save mode is activated by power button after clock setting.
