Goodmans 347531, User Manual

Page: 7 / 24

7
The station list is retained in the product memory so the next time you switch
the Classic DAB Radio on, the station search does not take place.
If there are no stations found, check that the telescopic antenna is fully
extended and that adequate DAB coverage exists in your area.
It is possible to perform a manual scan for stations. See page 9.
3.2 Standby & Auto Standby
1. Press the STANDBY button to power on the product/wake from standby
mode.
2. Press the STANDBY button again to enter Standby mode.
3.3 Adjusting the Volume
1. Rotate the VOLUME control clockwise or anti-clockwise to increase or
decrease the volume output.
3.4 Switching Modes
1. Press the MODE button on the product to switch to the available modes:
DAB, FM, BLUETOOTH & LINE IN. Check the display, which will confirm the
mode.
3.5 Pairing the Classic DAB Radio using Bluetooth
1. Repeatedly press the MODE button until you are in BLUETOOTH mode.
Your radio will begin searching for Bluetooth devices and ‘Searching…’ is
displayed.
2. Enable Bluetooth on your audio device and search for available Bluetooth
connections. Select GOODMANS DAB from the list. If you are asked for a
passcode, enter 0000.
3. ‘Connected’ will be displayed on your Classic DAB Radio once it has been
paired successfully. You can now begin playback from the audio device and
the output will playback through the Classic DAB Radio speakers.
Once you have paired the radio with a device, the radio will remember this
device and will pair with it automatically when activated and in range.
You do not need to re-connect any previously connected devices.
The radio will attempt to automatically connect to the last device it was paired
with, each time you go to BLUETOOTH mode.