3.2 Using Your DAB FM Radio For The First Time:
Quick Setup
3
3.1 Connecting The Power
Insert the power adapter to the 5V DC socket on your DAB FM
Radio, or insert 4 x 1.5V AA batteries into battery compartment
(4 x 1.5V AA battery not included).
1.
2. Insert the power adapter into a suitable mains socket.
3. Press the Power/ Mode button on the top of your DAB FM Radio.
Rotate the ON/OFF control clockwise to turn the radio on.
1.
2. Extend the telescopic antenna for the best reception possible.
Then press the Standby/Mode button to turn the radio on.
3.
When DAB mode is activated for the first time, a full scan will
automatically commence, or will play the last station before the
unit was turned off.
Rotate the Volume control clockwise/anticlockwise to increase/
decrease the volume.
4.
5. Once the radio has been switched ON, press the Standby/Mode
button to switch between DAB and FM modes.
6. During scanning the screen will display a slide bar that indicates
the progress of the scan, and the amount of radio stations that
have been found so far. Once the scan has finished, the radio
will select the first alphanumeric station.
Note: Hold the Standby/Mode button and unit will go to
standby mode.
