336723
3.12
Sleep function
Should you wish to set a timer for the unit to enter standby mode after a period of
time follow the steps below.
4.1
Basic CD Operation
1.
Press the FUNCTION button (4, 20) repeatedly until you see ‘Cd’ appear on the
top of the display.
2.
Press the EJECT button (11,28) to open the CD door.
Load a CD with the label facing outwards and press the EJECT button again to
close the door.
The EJECT function only operates in CD mode.
NOTE: You may need to angle the disc and slide the top half into the unit before
mounting the disc on the mechanism.
DO NOT push the door downwards to close.
Play a Disc
1.
Once loaded the unit will read the disc contents and begin playback. Pause
playback by pressing the PLAY/PAUSE button (10,23) once. To resume
playback press the PLAY/PAUSE button again.
2.
To stop playback press the STOP button (9,24).
Skip Tracks
1.
Press the SKIP
button (13, 34) to skip to the next track on the disc.
2.
Press the SKIP
button (12, 25) to skip to the previous track.
Searching Tracks
1.
Press and hold the SKIP button
(13,34) to fast forward the current track
playing.
2.
Press and hold the SKIP button
(12, 25) to fast rewind the current track
playing.
4.2
4.3
4.4
Operation
4
Quick Setup
3
1.
Ensure the unit is ON and not in STANDBY.
2.
Press the SLEEP button (6, 29) repeatedly to cycle through the preset timers
from 90 minutes to 10 minutes then OFF.
3.
When you have selected the required timer duration, after 1 second of inactivity
the setting will be stored and the countdown will begin.
