P. 32
PRECAUTIONS FOR HANDLING DISCS
With new discs
The symptoms described
below sometimes occur
when new discs are used:
• The disc is not played
even when it is loaded.
• Operation changes to
the next disc before the
first disc has a chance
to be played.
• The same disc is played
over and over again.
• The designated disc is
not played.
Remove all plastic particles of burr from
surfaces of disc before loading in
magazine.
These symptoms occur when
there are burrs on the centre
hole or outside circumference
of the disc and, as a result, the
disc has not been loaded properly
or the disc catches on something
inside the magazine. In cases like
these remove the burrs using a ball
point pen or similar implement, as
shown in the figure on the right.
WARNING
Although protective film is being marketed as CD accessories, use of these
products will result in malfunctions and should absolutely be avoided.
Center
hole
Burrs
Outside
circmference
Burrs
Goodmans Product Information Helpline (02392) 391100
Installation Helpline (01132) 868613
