OUR VISION...
Everyone should have the opportunity to enjoy our little piece of the ‘Aussie Dream’.
Designed and manufactured to the Building Code and suitable for domestic and
commercial use less than 1 metre high. Build your own “Goodtimes” in a configuration
that meets your needs.
All you require is:
What surface can you build a Good Times deck on?
A Good Times DIY modular deck can be built on concrete (ie alfresco areas), existing
pavers or even on grass/soil (using a concrete paver as your support base).
Introduction
The Goodtimes DIY Modular Decking System is a fast and cost effective way to build
your own deck. It consists of modular base frames that sit on a variety of different
adjustable supports that enable retrofitting into any existing area without digging any
holes. Prefabricated decking panels make laying your deck fast and easy.
Various Drill Bits:
3mm Drill Bit
47mm 3/8” Nutsetter
64mm 1/4” Nutsetter
47mm x 5mm Hex Drive
64mm Phillips Head Drive #2
4mm Drill Bit
Impact Driver, Electric
or Cordless Drill
Shifter or Spanner
to suit 16mm nut
Tape Measure
Drop Saw
Should you wish to
cut your own decking
and baseboards
Various Drill Bits
(Refer to list)
Spirit Level
1
Summary of Contents for 8451291
Page 1: ......
