4
ESV1500 Illuminated Cabinet
Mounting to Optional Wall Bracket (sku #706003)
1 . Attach the Wall Mount Bracket securely to the wall with open end toward ceiling .
2 . Slide Adjustable Shelf onto the Wall Mount Bracket and secure by tightening the two
(2) knobs to desired height .
3 . Attach the ESV1500 Illuminated Cabinet to the Adjustable Shelf .
4 . Use appropriate fasteners designed for mounting surface with a minimum hanging
weight of 30 lbs . (14 kgs .) .
Mounting to Optional Adjustable Base
(sku #704000 or #705000)
1 . Screw stand bottom into base .
2 . Loosen stand height adjustment knuckle
and extend inside tube out approximately
16" (40 cm)
3 . Position key hole slots on back of cabinet
between screw heads and washers on
stand, tighten with permanently affixed wing
nuts .
4 . Adjust stand to eye level of patient .
5 . Once properly mounted, connect the power
supply adapter to the unit and plug into an
outlet .
Cleaning and Maintenance
You may clean the exterior of your ESV1500 Illuminated Cabinet by using a clean, dry cloth
to remove dirt, dust, oil, grease etc .
Store all visual acuity charts out of direct sunlight . Over time, UV light may turn the charts
yellow, which could interfere with the visual acuity testing . If charts yellow, discard and
replace .
Service Information
There are no user repairable or serviceable parts found in the ESV1500
Illuminated Cabinet . Contact Good-Lite if your ESV1500 Illuminated Cabinet
needs repair .
Disposal
Dispose of cabinet per federal, state, and local regulations .
Key
Holes
Wing Nuts
Stand
Knuckle
(#2)
(#3)
(#1)
