2
Hardware Kit:
ZH-UC1271F03-WH1
REPLACEMENT PARTS LIST
Need Help?
PROBLEM
POSSIBLE CAUSE
CORRECTIVE ACTION
1. Light does not come on.
1. Power/ light switch is off.
3. Bad switch.
1. Discontinue use.
1. Call customer service (1-800-291-8838).
1. Verify power supply and light switch are on.
3. Test or replace switch.
2. Fuse blows or circuit breaker trips when
light is turned on.
Good Earth Lighting
®
1400 East Business Center Drive, Ste. 108 Mount Prospect, IL 60056
Good Earth Lighting
®
is a registered trademark of Good Earth Lighting, Inc.
© 2021 Good Earth Lighting, Inc.
TROUBLESHOOTING GUIDE
Please visit our website at: https://goodearthlighting.com/contact-usor call the
Customer Care Center 1-800-291-8838, 8:30 a.m.-5 p.m., CST, Monday-Friday.
MOUNTING BRACKET INSTALLATION
PLANNING: OPTIONAL LAYOUTS AND CONNECTING
WAVE SWITCH CONTROLS
EE
x12
BBx4
AAx2
1
2
3
Mark the general area where the mounting bracket
(AA)
will be located. Using a small drill or nail, make two small pilot holes at the
marked locations. Align the mounting brackets
(AA)
and drive screws
(BB)
into place.
NOTE:
Ensure mounting location is within 5ft. of
an electrical outlet.
Lift the fixture toward the mounting brackets
(AA)
while aligning the top of the fixture channel with both clips. Apply upward pressure
until channel snaps into place and seats into both brackets.
Connect fixtures, wave/5CCT sensor switch, and plug-in driver by using the provided various sizes of linking cords. Use provided cord
clips
(EE)
where additional wire control is needed. Peel the backing off each clip and mount where required. Plug the Plug-in Driver into
the outlet.
1
2
3
Under cabinet lights can be connected
using various lengths of linking cord to be
spaced apart 4", 12", or 30".
NOTE:
Cords are interchangeable depending on
space and layout desired. The
wave/5CCT sensor switch can be
connected before, in between, or end of
the lights.
ON/OFF:
Wave
hand under switch
Dimming:
Hold
hand under sensor
to change the light
level.
Change Color Temperature:
Press button to change
from 2700/3000/4000/5000/65000K
Up to 30 in
Good Earth Lighting
®
- 6 YEAR LIMITED WARRANTY:
The manufacturer warrants this lighting fixture to be free from defects in materials and workmanship for a period of (6) years from the date of original purchase by the consumer. The
fixture is not warrantied for use in a commercial or retail application. The warranty is limited to use in a residential environment. We will repair or replace (at our option) the unit in the
original color and style if available, or in a similar color and style if the original item has been discontinued, without charge. Defective units must be properly packed and returned to the
manufacturer with a letter of explanation and your original purchase receipt showing date of purchase. Call
1-800-291-8838
to obtain a return authorization number and an address
where to ship your defective product.
Note:
C.O.D. shipments will
NOT
be accepted. The liability of the manufacturer is in any case limited to replacement of the defective light fixture
product. The manufacturer will not be liable for any other loss, damage, labor costs or injury which is caused by the product. This limitation upon the liability of the manufacturer includes
any loss, damage, labor costs or injury which is (I) to person or property or otherwise; (II) incidental or consequential in nature; (III) based upon theories of warranty, contract, negligence,
strict liability, tort, or otherwise; or (IV) directly, or indirectly related to the sale, use, or repair of the product. This warranty gives you specific rights, and you may also have other rights
which vary from state to state.
FCC STATEMENT:
This device complies with Part 15 of the FCC rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference
received, including interference that may cause undesired operation. Warning: Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user’s authority
to operate the equipment. Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC rules. These limits are designed to provide
reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications. However, there is no guarantee that the interference will not occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: 1)
Reorient or relocate the receiving antenna. 2) Increase the separation between the equipment and receiver. 3) Connect the equipment into an outlet on a circuit different from that of the receiver. 4) Consult the
dealer or an experienced radio/TV technician for help.
FCC responsible party name :
Good Earth Lighting, Inc.
Address:
1400 E Business Center Drive, STE 108, Mount Prospect IL 60056, USA
Telephone number:
1-800-291-8838
Note: Sensor can only be mounted via
Command
®
Strips
CARE AND MAINTENANCE:
Periodically clean the fixture and diffuser using a mild, non-abrasive cleaner and soft cloth. When cleaning the fixture, make sure the power is turned off. Do not spray cleaner directly onto
any part of the fixture or LEDs.
Printed in Vietnam
