23
4.3
Flat screen mounting
Risk of injury by tripping and falling
>>
Place, transport and install product, parts and acceo
-
ries in a safe way.
Risk of material damage by improper
procedure
>>
Only use moderate force when tightening the screws
in order to avoid damaging threads.
>>
>>
NEVER set the screen on the front during installation!
Do not damage the flat screen by too long screws.
Tab. 16:
Mounting the flat screen
Allen key 4mm
with screwdriver
P-A
Phillips screwdriver
1. Lean the flat screen vertically on a
soft, large surface or a wall and
protect it of scratches and overturn-
ing.
A
2.
Dismantle the VESA plates off the
holder unit (A) by removing the
locking screws on the back side with
Allen
key
(P-A).
Installation is only possible with flat-back flat
screens.
Fig. 20: Flat screen mounting 1
3.
Attach the VESA plates with
retaining lugs upwards to your flat
screens by screws (M-A) or (M-B)
and
washers
(M-C).
Therefore, the VESA hole spacings
75x75mm or 100x100mm are available.
Fig. 21: Flat screen mounting 2