21
Risk of material damage by inappropriate ambi-
ent conditions
>>
>>
>>
Keep enough space around product and to the whole
system to ensure proper ventilation and mobility.
0RXQWRQO\WRVXI¿FLHQWO\WKLFNDQGVWDEOHVXUIDFHV
Protect against pressure points.
Tab. 15: Wall mounting
Allen key 4mm
with screwdriver
P-A
Allen key 5mm
P-B
4.2.1 Pre-assembly
1.
Check the strength and stability of the
surface before installing and do not
damage them.
2.
Choose a suitable mounting place.
3.
Screw the rod unit (B) clockwise into
the desk clamp (C).
6XEVHTXHQWO\¿[LWE\WKLJKWHQLQJWKH
$OOHQVFUHZVZLWK$OOHQNH\3$OLNH
shown.
$GMXVWWKHKHLJKWRIWKHVWRSULQJ6
WKDWWKHÀDWVFUHHQVGRQRWSXWRQWKH
surface.
Fig. 14: Desk Mounting - pre-assembly 1
6.
Clip the cover caps (D) on the right
and left side of the holder unit (A).
Fig. 15: Desk Mounting - pre-assembly 3
4.2.2 Table edge mounting
Thighten the desk clamp (C) clockwi-
se by hand.
Fig. 16: Desk mounting - Table edge mounting
