User Manual for
Mobile devices HOLDER
EN
- 2 -
Goobay
®
by Wentronic GmbH
Pillmannstraße 12
38112 Braunschweig
Germany
REV2016-01-11
V3.1
Re ad the user manual completely and carefully. It is part of the product and
includes important information for proper installation and use. Keep this
user manual for clarifi cation and only pass it on together with the product.
Safety Instructions
Risk of injury
>>
Do not modify product, product parts or accessories.
>>
Avoid extreme conditions, such as extreme heat and coldness, wet-
ness and direct sun light, as well as micro waves, vibrations and
mechanical pressure.
>>
Select the installation place so that neither operation nor the
driver‘s view is impaired while driving.
>>
Do not mount the suction cups to the side windows.
>>
Installing and setting only at standstill and secured car.
>>
Only use in dry ambience.
>>
Do not short-circuit ports and circuits.
Material damage by improper use
>>
Compare the specifi cations of product, power supply and periphe
rals. These must be identical.
>>
Regularly check the tightness of the product before driving.
Extreme heat, cold and humidity can change the elasticity of the suction mount.
>>
Only use in the temperature range of 0 °C ~ 40 °C.
>>
The installation place must be dry and free of grease and dust.
>>
Do not use equipment heavier than 250 g.
>>
Use product, product parts and accessories only in perfect condition.
Description, Function and Intended Use
Goobay-car holder serve for the secure placement of your small mobile devices
such as smartphones and tablets. They involve either model-specifi c or univer-
sal device adapter and are offered as individual products and sets. Goobay-car
holder offer various mounting and confi guration options and can be attached to
windshield, air vent, 12 V socket or headrest.
Model-specifi c adapters
Security clip
model-specifi c recesses for operating elements
Plug-in adapter for base support
Support for model-specifi c adapter (Shape may vary)
Counterpart to the plug-in adapter
locking
lug
Mounting options
Headrest holder
Universal adjustable adapter
suction
mount
12 V socket holder
Locking lugs of the air vent holder
Spacer
Quick Snap air vent holder
Quick Snap air vent holder with adapter plates
Steel adapter plate round (adhesive)
Steel adapter plate rectangular (adhesive)
Mounting
Preparing
>>
Select the installation place so that neither operation nor the
driver‘s view is impaired while driving.
Operation
a)
Headrest mounting
1.
Slide the headrest far upwards.
2.
Loosen the 2 head restrest terminals.
3.
Attach the headrest holder so that the opera-
bility in the vehicle rear is ensured.
4.
Tighten the 2 headrest terminals.
5.
Adjust any joints and tighten them.
b)
Suction cup mounting
1.
Clean the surface.
As ideal base we recommend smooth and
clean windshields.
2.
Loosen the the suction cup.
3.
Place the suction cup fl ush to the
selected
surface.
Moisten the suction cup with poor adherence
to
something.
4.
Adjust any joints and tighten
them.
c)
12 V socket mounting
1.
Remove the cigarette lighter.
2.
Plug the 12 V connector of 12 V
socket holder into the 12 V ciga-
rette
lighter
socket.
For some vehicle models, you need to switch
on the ignition so that voltage is present.
In order to charge your mobile device, a
model-specifi c charging cable may be
necessary.
3.
Adjust any joints and tighten them.
4.
Turn the gooseneck fi tting way
around.
Charging cables are not included.
d)
Air vent mounting
1.
Adjust the air vent slot on maxi-
mum fl ow.
2.
Plug the 2 locking lugs of the air
vent holder with into the air vent.
In some vehicles the mobile device holder
can only be loose due to thinner air vent
slats.
3.
Adjust any joints and tighten them.
4.
Set the spacer so that the mobile
device holder is fi rmly seated.
e)
Air vent mounting by Quick Snap
1.
Adjust the air vent slot on maxi-
mum fl ow.
2.
Plug the locking lugs of the air
vent holder into the air vent.
Quick Snap holder can be mounted vertically and hori-
zontally.
3.
Remove the protective fi lm from the steel
adapter plate.
4.
Glue the steel adapter plate to the inside of
your smartphone case or to the back of your
smartphone.
Use
Setting of ball joints
All ball joints have a locking mechanism that must be resolved prior to setting
and placed fi rmly back after setting. These may be implemented as:
>>
RELEASE inscription,
>>
Arrow symbols and/or
>>
Locking nuts
Maintenance, Care, Storage and Transport
>>
Let a professional do maintenance and repair work.
>>
Only use a dry and soft cloth for cleaning.
>>
Do not use detergents and chemicals.
>>
Store cool and dry.
>>
Regularly check the tightness of the product.
Disposal Instrustions
This product should not be disposed together with domestic waste. Please return
your product free of charge at the end of its service life at the producer, the sales
outlet, or a public collection point, established for this purpose. Details for dispo-
sal are regulated in the relevant federal state law. Potential recyclable materials
are fed into the recycling cycle to obtain new raw materials from them. Following
materials are collected a local collection points:
>>
Waste glass, plastic, waste metal, metal sheet, and more.
This type of recycling of waste contributes signifi cantly to the protection of our
environment.
