Goobay 97790, User Manual, Page: 12 / 28

13
User manual
4. Press the crimping tool firmly.
5. Slide the bend relief may be present on the connector until it clicks into
place.
The cable is now ready for use.
4.4 Cutting and stripping tool
Use the cutting and stripping tool for cutting and stripping of multi-conductor
cables.
1. If necessary, adjust the stop screw by Phillips screwdriver so that the
inner conductor and the inner cable will not be damaged.
2. Lead the cable into the cutting or stripping tool to the desired length.
3. Press the cutting and stripping tool carefully.
4. Turn the cable supplied in the compressed state for better stripping.
5. Pull the cable supplied in the pressed state of the cutting and stripping
tool.
5
Maintenance, Care, Storage and Transport
-------------------------------------------------------------------------------------------
Material damage
>> Clean only with a dry, soft cloth.
>> Do not use cleaning agents and chemicals.
-------------------------------------------------------------------------------------------
•
Maintain the joints of crimping pliers and cutting and stripping tool with
light machine oil, when they get harder to move.
• Store the product out of reach of children in a dry and dust-protected
environment, when not in use.
• Store the battery outside of the LAN network tester, when not in use.
• Use and keep the original packaging for transport.
6
Specifications
LAN Network tester
Connectors RJ11-45
Energy supply 9 V Block (not included)
Dimensions Master unit 107 x 67.8 x 28.6 mm
Weight Master unit 72 g
Dimensions Remote unit 107 x 38 x 28.6 mm
Weight Remote unit 41 g