EN
- 2 -
User Manual
USB chargers
Goobay
®
by Wentronic GmbH | Pillmannstraße 12
38112 Braunschweig | Germany
REV2016-04-19
V1.0
We reserve the right of misprints and changes to
product, packaging or product documentation.
71808
1 Safety Instructions
1.1 General
•
Read the user manual completely and carefully before use.
It is part of the product and contains important information for correct use.
•
Keep this user manual.
It must be available for uncertainties and passing the product.
Notes for network separation
The product has no power switch and may be used only in easily accessible outlets
to quickly remove it in an emergency and after use.
•
Voltage-free only when the plug is pulled.
•
In case of emergency, during thunderstorms and after use, pull the pro-
duct on its plug housing!
•
Do not open the housing.
•
Do not let the product unattended in use.
•
Only let a trained electrical engineer do installation, disassembling, main-
tenace and repairing work.
•
Compare the specifications of product, power supply and peripherals.
These must be identical.
•
Not meant for children.
•
Do not repair defective products by yourself, but contact the dealer or
producer.
•
Do not modify or alter product nor accessories.
•
Avoid stresses such as heat and cold, moisture and direct sunlight, vibra-
tion and mechanical pressure.
•
Only use in dry ambience.
•
Risk of injury by stumbling and falling
1.2
Warning levels
Warnings against hazards that may result in
injuries
in case of non-observance.
Warnings against hazards that may result in
material
damage
in case of non-observance.
2
Description and Function
The intelligent 6-port USB multiport charger charges up to 6 devices at the same
time and fits perfectly to the load requirements of your equipment.
At the 4 Auto-ID USB charging sockets respectively 5 volts and a maximum of 10 A
output current is available. Output current is automatically adjusted to the needs of
your device.
At the QC2.0 USB quick charge socket fast rechargeable devices can be charged
depending on the QC version with up to 12 volts and up to 2 amperes.
The USB-C
TM
charging socket handles 5 volts and a maximum of 3 amps.
2.1
Product parts
Fig. 2:
Product parts
4 Auto-ID USB charging sockets
QC2.0 USB quick charge socket
USB-C
TM
charging socket
Product housing
Mains connection
Operation LED
2.2
Scope of delivery
USB multiport charger, Mains cable, User manual
3
Intended Use
We do not permit using the device in other ways like described in chapter
Description and Function. Use the product only in dry interior rooms. Not
attending to these regulations and safety instructions might cause fatal
accidents, injuries, and damages to persons and property.
4 Preparing
>>
Compare voltage, mains voltage and frequency of product
and
mains.
>>
Do not overload the product and attend to its name plate.
5 Connecting
Risk of injury by stumbling and falling
•
Ensure safe cable laying.
1.
Connect the mains cable to the USB multiport charger and
after that, to an easily accessible and free mains socket.
The USB multiport charger is ready for use, when the Opteration LED shines.
2.
Plug your mobile device into any output of the USB multiport
charger by its USB charging cable.
3.
Repeat step 2 for up to 4 further mobile devices.
Disconnect all cable connections after use.
6 Operating
The USB multiport charger includes no elements to operate during use.
7
Specifications
USB multiport charger
Connectors
C8 plug, 5x USB-A socket, USB-C
TM
socket
Input
100-240 V~, 50/60 Hz, 0.44 A max.
Output
4x USB-A
QC2.0
Type-C
5 V
max. 10 A
5 V
2 A,
9 V
2 A,
12 V
1.5 A,
5 V
3 A max.
Protection class
2
Dimensions
100 x 80 x 29 mm
Weight
196 g
Power cable
Connectors
EURO plug, C7 jack
Cable length
1.5 m
Weight
63 g
Tab. 2:
Specifications
8
Maintenance, Care, Storage and Transport
The products are maintenance-free.
Material damage
•
Clean only with a dry, soft cloth.
•
Do not use cleaning agents and chemicals.
•
Store cool and dry.
•
Store the product out the reach of children and in a dry and dust-protec-
ted ambience when not in use.
•
Keep and use the original packaging for transport.
9
Liability notice
We reserve the right to printing errors and changes to product, packaging
or product documentation.
•
See our terms of warranty. These are available in their current form under
the given contact details.
10
Disposal Notes
According to the European WEEE directive, electrical and electronic
equipment must not be disposed with consumers waste. Its components
must be recycled or disposed apart from each other. Otherwise contami
native and hazardous substances can pollute our environment.
As a consumer, you are committed by law to dispose electrical and electronic de-
vices to the producer, the dealer, or public collecting points at the end of the devices
lifetime for free. Particulars are regulated in national right. The symbol on the pro-
duct, in the user`s manual, or at the packaging alludes to these terms. With this kind
of waste separation, application, and waste disposal of used devices you achieve an
important share to environmental protection.
WEEE No: 82898622
11
EU Declaration of Conformity
With the CE sign,
Goobay
®
, a registered trademark of the Wentronic
GmbH ensures, that the product is conformed to the basic European
standards and directives.
