13
2. Switch OFF the amplifier (3) after use. The Indication
LED ceases.
Adjust the DVB-T antenna:
• Change position and place of the DVB-T antenna, if the
signal quality is too bad.
• Perform the channel scan of your DVB-T Receiver/TV.
7 Installing:
BEFORE Installing to a wall, make sure the installation place
offers a good signal quality. Do this by adjusting, connecting
and testing all devices before wall installation.
Installing the stand:
1. Insert the antennas cable
through the cable slots of the
stand.
2. Turn the stand and place it
with notches upwards on a
horizontal surface.
3. Slide the DVB-T antenna
onto the stand until locking.
Uninstalling the stand:
1. Remove the antenna cable from the cable slots of the
stand, to avoid damaging the cable.
2. Pull the stand downwards or the DVB-T antenna
upwards.
wall installation:
1. Make sure, no live cables/tubes are inside the wall
behind the place of installation.
2. Use appropriate installation material, eg. different dowels
and screws for concrete/masonry and wood walls.
Your retailer can inform you about this matter.
3. The slot distance for wall installation is 360 mm.
Install the DVB-T antenna horizontal without stand.