User‘s Manual
18
1. Switch off the HDMI Extractor (A).
2. Connect your HDMI source device to the HDMI input of the HDMI Extractor
(A) by HDMI cable.
(HDMi iN)
3. Connect your output device(s) by fitting cable(s) to the HDMI Extractors
outputs
(Out)
.
4. Connect the HDMI Extractor (A) to its power supply unit (B) and this to a
100-240V~ mains socket.
5. Switch on all connected devices and the HDMI Extractor.
6. Select the right ports and channels of your source and output devices.
The POWER LED shows readiness.
The LINK LED shows, that connection between source and output device is
active.
5 Operating
1. Set the output switch to the preferred function.
The so called EDID (Extended Display Identification Data) Function reports to
the HDMI output device, what the best possible audio format is.
Output switch position
tV
Bitstream
2CH lPCM
ac
tiv
e o
ut
pu
ts
HDMI
x
x
x
TOSLINK
x
x
RCA
x
Tab. 14: Operating
2. Check, if you have set the right audio adjustments on your devices, espe-
cially when there is no sound.
6 Warranty and liability
• The producer grants a 2 years warranty to a new device.
• As the manufacturer has no influence on installation, warranty only applies
to the product itself.
• If any fault or damage is detected on your device, please contact your dealer
and provide your sales slip or invoice as evidence of the purchase, if
necessary. Your dealer will repair the fault either on site, or send the device
to the manufacturer. You make the work of our technicians considerably
easier, describing possible faults in detail – only then you can be assured
that faults, occurring only rarely, will be found and repaired with certainty!
