10
Manual
5 Connecting and Operating:
1. Connect the included mains cable to the mains socket of the Charging Station.
2. Connect the devices, you would like to charge, to the Charging Station via the fitting
adaptor plug by plugging it into the slots on the top side of the Charging Station.
Device
Adaptor plug
Mains connection
Press
Mains switch (I =on / 0 = off)
3. Plug in the mains cable to a mains socket and switch on the Charging Station.
A blue LED light flashes on for each charging port. This shows the Charging
Station is connected to the device and the device is charging.
When the devices are charged completely, you can see a full status bar at the
device.
All ports are independent from each other.
4. Remove the device from the adaptor plug by vertical and careful pulling.
Sony Ericsson models are need to be wiggled a little bit for removing.
NOTE:
Remove the adaptor plugs by pressing
the pads on the bottom side.
At the side across the mains switch,
you can connect 2 further USB
devices via USB cable (not included)
and charge them.