EN
- 15
GONGKITE.COM
BRIDLES
IMPERATIVE :
With each use, verify the connection points and be sure there are no tangles.
Your Kite has been delivered with a full set
of Bridles, installed and in the Standard
Position. If you need to change your
Bridles or Re-Install them, refer to the
Diagram below for correct positioning. As
you become more familiar with your Kite,
you will be able to adjust the Bridles so
you can optimize its potential in function
with your needs.
By default, the Back Bridles are
connected by a Larks Head Knot in
Position 1.
You may change this adjustment for
managing the pressure on the Bar and
the Kites reaction in function with your
preferences.
Attention :
The adjustments made MUST
be the same, right & left, of the Kite.
POSITION 1 :
•
Light Bar pressure
• Very reactive Kite
• Tight turns
POSITION 3 :
•
Heavy Bar pressure
• Extremely precise Piloting
1
2
3
POSITION C :
•
More Depower
By default, the Front Bridles are
connected by an Larks Head Knot in
Position B.
You may modify this so you can adjust
the residual power of your Kite in function
to your preferences.
Attention :
The adjustments made MUST
be the same, right & left, of the Kite.
C
B
A
POSITION A :
•
More
Residual
Power
Ear
3
A
C
B
2
1
Backline bridle setup
Frontline bridle
setup
BACKLINE SETUP
FRONTLINE SETUP
