PANEL DESCRIPTIONS
Front Panel
1.
SIGNAL:
bright - HDMI source signal is detected; dark - no HDMI signal.
2.
POWER:
bright - power on; dark - power off.
Rear Panel
3.
On/Off switch:
Power on/off switch
4.
+5V DC:
Connect to a 5V DC power supply unit here
5.
HDMI INPUT:
Connect to the HDMI source here
6.
HDMI OUTPUT:
Connect to a HDMI display here for local monitoring or cascade to another HDMI
splitter such as SP-5012, SP-5014, SP-5018P, SP-5018P, SP-5024 or SP-5028
7.
MODE:
0 – Supported up to Full-HD(1080p@60) - 24bit 2D video & 7.1ch audio
1 – Supported up to Full-HD(1080p@60) - 24bit 2D video & 2ch audio
2 – Supported up to HD(1080p@30)(1080i@60)(720p@60) - 24bit 2D video & 7.1ch audio
3 – Supported up to HD(1080p@30)(1080i@60)(720p@60) - 24bit 2D video & 2ch audio
4 – Supported up to Full-HD(1080p@60) - 36bit 2D video & 7.1ch audio
5 – Supported up to Full-HD(1080p@60) - 24bit 3D video & 2ch audio
6 – Supported up to Full-HD(1080p@60) - 24bit 3D video & 7.1ch audio
7 – EDID learning mode – learns EDID from the display
8.
Cat.X OUTPUT 1~8:
Link to each HDMI display via a Cat-5e/6/7 cable with a HDMI over CAT5e
receiver CV-735 or CV-715s on each CAT5 output port
3
HARDWARE INSTALLATION
Broadcasts HDMI signals to eight remote displays with a local port
1. Turn off all devices, including sources and displays.
2. Connect an HDMI source (such as a Blu-ray Disc player) to the
HDMI INPUT
port.
3. Connect the receivers (CV-735 or CV-715s) via Cat-5/5e/6 cables to each
HDMI Signal OUTPUT
port.
4. Connect the local HDMI equipped monitor.
5. Plug in 5V 4A DC power supply.
6. Power on the HDMI displays.
7. Power on the HDMI source device.
CONNECTION DIAGRAM
4
