3
PANEL DESCRIPTIONS
Rear Panel
1. Ethernet:
HDMI Ethernet Channel(HEC) of HDMI OUT1
2. SPDIF OUT:
Audio Return Channel(ARC) of HDMI OUT1
3. HDMI OUT1~8:
Eight distributed HDMI outputs to HDMI displays
4. HDMI IN:
Connect to a HDMI input source
5. RS232:
For technical support only [firmware update]
6. Dip Switch:
Switch between normal operation mode or firmware update mode(switch ON)
7. Power LED:
Lights on when power is on
8. +5V DC:
Connect to the +5VDC 4A power supply unit
HARDWARE INSTALLATION
Broadcasts HDMI signal to 8 HDMI displays!
1. Switch off all devices, including monitors.
2. Connect to the receivers (Connect
HDMI OUT1
to a
HDMI 1.4 TV
is recommended).
3. Connect Ethernet to an Ethernet Hub/AP (If HDMI OUT1 is connected to a HDMI 1.4 TV).
4. Connect ARC to an AMP (If HDMI OUT1 is connected to a HDMI 1.4 TV).
5. Connect an HDMI source (such as a Blu-ray Disc player) to the HDMI In.
6. Plug in 5V DC power supply.
7. Power on the HDMI monitors.
8. Power on the HDMI source.
