NOTICE
1. While connecting a new monitor to the splitter under mode D (auto EDID) & mode E and F (EDID
learning), experiencing a short period of time without displaying might be expected. The splitter will do
Automatic EDID learning which analyzes the newly connected monitor to see if the EDID for the HDMI
input is necessary to update!
2. For firmware update through Mini-USB, users MUST turn the power off, set the rotary switch to “0”,
and then connect the Mini-USB cable between PC and device. Open the firmware update software,
[1]
set the correct com port and baud rate (57600 is recommended),
[2]
click the “File” button to direct to
the firmware HEX or BIN file, power on the device and press “Program MCU” symbol to firmware
update. Once update process is done, please power off the device and set the rotary switch back to
other mode (NOT to “0”).
5
