7
Connect the HDMI over IP extenders to the Router/Ethernet Hub.
1
Mapping
6
Access
2
Video Wall
7
Setup
3
OSD
8
Log
4
Schedule
9
Smart Controller
5
Event
1. Mapping
On this Page, you can see runtime status of all TX/RX device in controller. The way to do
input/output mapping is to drag TX icon to RX icon. It also provides 10 profile spaces to save
the frequently used scenarios into the device. Clicking the profile button to preview the saved
scenarios.
2
3
4
5
6
7
8
1
9
8
2. Video Wall
It supports video wall function. User can click the
button to add the setting window of
video wall. Click the
button to do more advanced setting. On the video wall setting page,
you can define the layout, determine the OSD to turn on/off, and adjust the bezel function. The
method of setup the video wall is to drag TX and RX to gray preview display area (see below
example diagram) and then click the save button. After saving, just go back to Video Wall List
and click
button to enable the video wall.
*Please note that, the TX /RXs selected into preview display much be rectangle layout.
*When you enable the video wall function, the corresponding TX and RX will be locked in the
Matrix page until disable it in video wall page.
