7
OPERATION APPROACH
Software Operation
System Requirements and Precautions
1.
Whenever power off VW-1312P, please stay unpowered at least 5 to 10 seconds to allow power
capacitors to discharge.
2.
The VW-1312P provides software control program which runs under Microsoft Windows 98, 2000,
XP, 7, 8 through the interface of RS-232 serial control.
3.
Before you click on the icon of the software, make sure you have secured the connection between
your computer COM port and the VW-1312P.
Start the Software Control Program
When clicking on the executable file, the following dialog will pop-up. There are two ways to control the
VW-1312P device (under Microsoft Windows 7, please run as administrator).
RS-232 serial Mode: Use RS-232 to connect the port on device and computer. Select correct COM port
and click the
button.
Ethernet Mode: Enter the device IP address and click the
button.
After the software control setting is accomplished, it will enter the control interface directly.
8
Control Interface
1.
Connection Status:
Show the connect information and status. If you use RS-232 serial control Mode to connect device,
the graph is
. In contrast, the graph of Ethernet is
.
2.
Input Control:
In this part, you can set up the input source, source display mode and screen rotation.
(1)
Source setting
Set the Input source. You can select at most two input source.
1
2
3
4
5
6
7
