~ 6 ~
1.
Connect SDI enable equipments to the output of SW-3108.
2. Connect the SDI input sources to the inputs of SW-3108.
3. Plug power adapter cable into 5V DC power jack.
4. Use IR remote, RS-232, or front panel push button to switch between input channels.
Reserved Reserved
Reserved
POWER
Reserved
Reserved
Reserved
Reserved
Reserved
Reserved
Reserved
Reserved
INPUT 1
INPUT 2
INPUT 3
INPUT 4
INPUT 5
INPUT 6
INPUT 7
INPUT 8
Reserved
Reserved
Reserved
Reserved
Reserved
Reserved
Reserved
Reserved
Hardware Installation
IR Remote Control
