1
INTRODUCTION
The
SP-5004IZM-DA
1x4 HDMI 2.0a Splitter with Built-in& User Adjustable EDID Management
and Audio Extractor
provides the most cost effective and advanced HDMI splitter solution in the market,
by which the high definition video and high quality audio can be transmitted to 4 different locations without
losing any quality.SP-5004IZM-DA also supports HDR and the true 4K2K video! Besides, this device
supports the separation of high quality digital S/PDIF (Toslink) audio & stereo analog audio from the
incoming HDMI signal without losing any active audio channels from audio bit-stream
With built-in USB firmware update mechanism, the compatibility among countless HDMI sources
and receivers can be further guaranteed. With the upmost HDR/4K2K@60 4:4:4 8bits and high definition
audio support, SP-5004IZM-DA is suitable for high quality HDMI broadcasting, digital signage and
education applications!
FEATURES
● HDMI2.0a compliant
● Supports 4K2K@60 4:4:4 8bits
● Supports HDR
1
, which is 4K2K@60 4:2:0 10bits
2
● Controllable 4K to 1080P downscale using dip switch
● HDCP 2.2 and 1.4 compliant
● Wide frequency range: 25MHz~600MHz
● Video bandwidth: 18Gbps
● Supports audio extraction via Toslink & stereo
● Supports resolution downscaling from 4K2K to 1080P!
● Supports default EDID and EDID learning from display
● Supports xvYCC, x.v.Color& Deep Color
● Micro-USB firmware update for expanding compatibility
● HDMI Audio Format: PCM2/5.1/7.1, Dolby 5.1/7.1, DTS 5.1/7.1
● Optical Audio Format: PCM2, Dolby 5.1, DTS 5.1
● Easy installation
1. HDR = High Dynamic Range.
2. The video bandwidth of 4K2K@60 4:2:0 10bits (HDR) is 384 MHz, and the 4K2K@60 4:4:4 8bits
is 594MHz.
1. NOT supports
2. SP-5004IZM-DA can bypass 4K HDR data content, but can NOT process it and make HDR content
100% fit into 1080p
(1) Resolution downscaling from 4K2K@60 4:2:2 to 1080P
(2) Frame rate conversion
(3) 4K2K@60 4:2:2 to 4K2K@60 4:2:0
2
PACKAGE CONTENTS
● 1x SP-5004IZM-DA
● 1x DC 5V wall wart
● 1x User Manual
SPECIFICATIONS
Model Name
SP-5004IZM-DA
Technical
Role of usage
1x4 Distribution Amplifier (Splitter)
HDMI compliance
HDMI 2.0a
HDCP compliance
HDCP 2.2 / 1.4
Video bandwidth
Single-link 600MHz [18Gbps]
Video support
HDR 4K2K@60(4:2:0 10bits) / 4K2K@60 (4:4:4 8bits)
Audio support
DTS-HD Master Audio, Dolby TrueHD Dolby Digital,DTS, LPCM
ESD protection
Human body model
— ±15kV [air-gap discharge] & ±8kV [contact discharge]
Firmware update
Feasible via Micro-USB port
Input
1x HDMI
Output
4x HDMI + 1x T 1x 3.5mm phone jack
HDMI connector
Type A [19-pin female]
3.5mm connector
Stereo
Optical audio
connector
TOSLINK
Dip switch
EDID Mode selection
Mechanical
Housing
Metal enclosure
Dimensions
[L x W x H]
Model
142 x 62 x 21mm[5.6" x 2.4" x 0.8" ]
Package
175 x 128 x 134mm [6.9" x5" x5.3"]
Carton
662 x 366 x 290mm [2'2" x 1'2" x 1']
Weight
Model
221g[7.8 oz]
Package
468g[16.5 oz]
Fixedness
Wall-mounting case
Power supply
5V 2A DC
Power consumption
6 Watts [max]
Operation temperature
0~40°C [32~104°F]
Storage temperature
-20~60°C [-4~140°F]
Relative humidity
20~90% RH [no condensation]
