9
(2) Walls Switching
User can define wall size by entering the wall parameters. Dragging Encoders or
Decoders to Wall and Wall Decoders icon to setup the video wall function. Please note
that the resolution of each Wall Decoders is divided by the wall size. For example, the
resolution of wall is 3840x2160 and the wall size is 4 (2x2), the resolution of each
decoders is 1920x1080. If you want to mute the video or remove the video wall, please
click the right button to select those function.
(3) RS-232 Routing
Bi-directional RS-232 Signal are transmitted between the device transmitter and receiver.
Dragging the RS-232 icon of Senders to Receivers to make connection and
sending/receiving data.
10
(4) Infrared Routing
Bi-directional IR signal can be transmitted between the transmitter and receiver. The IR
signal can be generated either from receiver or a control system. You can drag the
Infrared Senders icon to Receivers to do the infrared routing.
(5) Firmware Update
Click the drop-down lists to select the file which you want to write into device
Select the device which you desire to update firmware
Click right button to choose update device item and firmware will start to update
After updating, please reboot the device
This default reset process will take about 5~10 seconds.
