3
PANEL DESCRIPTIONS
Transmitting unit
►
CV-57KG-TX
Front Panel
1. EDID MODE:
0 = [Video]
–2D / Full-HD 24bit 1080p@60 [Audio] – up to 7.1ch surround sound
1 = [Video]
–2D / Full-HD 24bit 1080p@60 [Audio] – up to 2.0ch surround sound
2 = [Video]
–2D / Full-HD 36bit 1080p@60 [Audio] – up to 7.1ch surround sound
3 = [Video]
–2D / Full-HD 36bit 1080p@60 [Audio] – up to 2.0ch surround sound
4 = [Video]
–2D / HD 24bit (1080p@30)(1080i@60)(720p@60) [Audio] – up to 7.1ch surround sound
5 = [Video]
–2D / HD 24bit (1080p@30)(1080i@60)(720p@60) [Audio] – up to 2.0ch surround sound
6 = [Video]
–3D / Full-HD 36bit (1080p@60) [Audio] – up to 2.0ch surround sound
7 = [EDID Learning Mode]
– learns EDID from the display
2. HDMI IN:
Connect to a HDMI source with a HDMI male-male cable
Rear Panel
3. +5V DC:
Connect to 5V DC power supply
4. HDMI Signal OUT:
Plug in a Cat.5/5e/6 cable that needs to be linked to the receiving unit
CV-57KG-RX
4
Receiving unit ► CV-57KG-RX
Front Panel
5. Signal Level:
Adjust the 8-level signal equalization control to the received HDMI signals. The HDMI
signal level varies from 0 (strongest) to 7 (weakest) for respective transmission length from longest
possible range to short distance. Dial the Signal Level from 7 to 0 and stop turning the rotary switch
whenever the audio/video is playing normally. Inappropriate signal level setting may cause
overpowering issues that would shorten the product's life significantly!
6. HDMI OUT:
Connect to a HDMI display with a HDMI male-male cable.
Rear Panel
7. +5V DC:
Connect to 5V DC power supply unit.
8. HDMI Signal IN:
Plug in a Cat-5/5e/6 cable that needs to be linked to the transmitting unit
CV-57KG-TX
