5
INSTALLATION
1. Connect your HDMI/DVI source (such as a Blu-ray Disc player) to the transmitting unit CV-57H-TX.
2. Plug-in the receiving unit CV-57H-RX to your HDMI display (such as a HDTV or a projector).
3. Connect your CAT-5/5e/6 LAN cable between the transmitting and receiving units.
4. Make sure your CAT-5/5e/6 LAN cable is tightly connected and not loose.
5. Plug in 5V DC power cord to the power jack of the transmitting unit CV-57H-TX.
EDID LEARNING
1. Turn on CV-57H-TX.
2. Turn the Mode of CV-57H-TX
counterclockwise
from 0 (for surround sound) or 1 (for stereo) to 7.
3. Use a HDMI cable to connect CV-57H-TX & the display (better not connect to video source). The
LED on the RJ45 of CV-57H-TX will dim and light again, which indicates the EDID learning process is
finished.
4. Turn the Mode of CV-57H-TX
clockwise
from 7 to 0 (for surround sound) or 1 (for stereo).
The most
important thing is don't let the rotary arrow pass through 6 which will erase the EDID just learned and
restore to default EDID.
5. Connect CV-57H-TX and the video source through a HDMI cable and enjoy the experience.
