PANEL DESCRIPTIONS
Transmitting unit
►
CV-54B-TX
Front Panel
1. IR Flasher:
3.5mm socket for plugging in the extension cable of IR flasher
2. IR Receiver:
3.5mm socket for plugging in the extension cable of IR receiver
3. HDMI IN:
connect to a HDMI source device with a HDMI male-male cable
4. +5V DC:
connect to 5V DC power supply unit
Rear Panel
5. IR BNC:
Connect to the same IR BNC jacks on the receiving unit respectively.
6. R, G, B BNC:
Connect to the same R, G, B BNC jacks on the receiving unit respectively.
7. Sync BNC:
Connect to the same Sync. BNC jacks on the receiving unit respectively.
3
Receiving unit ► CV-54B-RX
Front Panel
8. IR Flasher:
3.5mm socket for plugging in the extension cable of IR flasher
9. IR Receiver:
3.5mm socket for plugging in the extension cable of IR receiver
10. HDMI OUT:
connect to a HDMI display with a HDMI male-male cable
11. +5V DC:
connect to 5V DC power supply unit
Rear Panel
12. IR BNC:
Connect to the same IR BNC jacks on the transmitting unit respectively.
13. R, G, B BNC:
Connect to the same R, G, B BNC jacks on the transmitting unit respectively.
14. Sync BNC:
Connect to the same Sync. BNC jacks on the transmitting unit respectively.
4
