CLEANING
It is extremely easy to clean the FT200 machine by
loosening the side knobs and dismantling the
working table. Through the side tap remove any
working residual.
When necessary clean the sprayer as shown in
pictures 13 and 14.
When parts wear out or when the machine is finally
scrapped, waste disposal must be carried out in
compliance with the laws in force.
Electric Motor
Aluminium AL
Steel AC
Copper CU
Polyamide PA
Main Body
Steel AC
Polyamide PA
Submersed pump
Polyamide
PA
Steel
AC
Aluminium
AL
Copper
CU
Epoxy Resin
The European Directive 2002/96/CE
arranges that in the event of scrapping of
electrical equipment, they must not be
disposed of city solid refusals but collected
separately, in order to optimize the level of recovery
and recycling of the materials and above all in order
to prevent damages to health and environment.
To comply with European Directive 2002/96/CE, all
electrical equipments must be marked with crossed
basket symbol.
The packing of the machine will be disposed of in
accordance with the methods laid down by current
legislation.
For further information concerning disposal of
electrical equipment, please refer to public
administration service.
GB
22
10. Disposal
14
13
12
CAUTION !