5
Design and function
22 / 86
5
Design and function
The machine consists of the base frame with swing-out legs including the installed technology, the
motor, the cutting table, the cutting disk protection hood with cutting disk, and the water tank with
water pump.
5.1
Scope of delivery and responsibilities
The machine was developed and built under the sole responsibility of Gölz GmbH.
After handover to the operator, the responsibility for safe handling and instruction of the operating
personnel is transferred to the operator.
The manufacturer offers training on the machine.
The following components are included in the scope of delivery:
Component
Qty
Bridge saw GS350A-120
1
Technical documentation
1
Optional accessories
Qty
Transport wheels Support leg
1
Lateral roll jib
1
Lateral jib
1
T-Lock tile clamping device
1
Tile stop 1m
1
Summary of Contents for Bridge Saw
