GÖLZ Bridge Saw, Original Operating Manual

Page: 20 / 86

4 Technical data
20 / 86
4.8 Operating conditions
Workspace
Angabe Value Unit
Temperature range Room temperature 5-45 °C
Relative humidity, maximum
60
(without condensation)
%
Conditions
Only operate the machine in a dust-free environment!
Avoid direct wetness, dust exposure and frost.
Do not operate in strong electric and magnetic fields!
Do not operate the machine in an explosive environment!
4.9
Cutting blades
Cutting blade
Cutting blade
diameter
Material
Number of
segments
Segment
height
SlimFast
Ø 350 mm
ceramic, fine stoneware,
tiles, marble, granite
- 10 mm
RX1
concrete, exposed
aggregate concrete, brick,
clinker, hard stone, granite
24 16 mm
GN25
hard stone, granite, natural
and artificial stone
24 10 mm
NOTE!
All cut-off wheels used must be designed for the maximum drive speed of the machine and the
intended use with regard to their permissible maximum cutting speed.
DANGER!
Risk of injury due to defective or incorrectly mounted blades!
Wrong direction of rotation and damaged cut-off wheels can lead to serious personal injury!
- Before starting work, check cut-off wheels for breakage of individual segments, segment
pieces, cracks at the segment foot, deformation of the cut-off wheel or wear.
- Observe direction of rotation arrows on the cut-off wheel and cut-off wheel protective
cover!
DANGER!
Risk of injury from untested or approved tools!
Untested or approved cutting discs or circular saw blades can cause serious personal injury!
- Check that the correct cut-off wheel is fitted before starting work.
- Observe direction of rotation arrows on the cut-off wheel and cut-off wheel protective
cover!