CHARACTERISTICS
- Hands-free monitor.
- 7" TFT colour screen.
- Monitor with simple installation (unpolarised 2 wire BUS).
- Touch screen for access and selection of menu functions:
User menu:
- Display image from door panel(s).
- Display camera images (D-CAM-GB2 module required).
- Intercom calls within an apartment (inner broadcast).
- Intercom calls within an apartment (inner call).
- Intercom calls between apartments (name list call).
- Call the surveillance monitor.
- Display photos of door panel calls/cameras and delete photos (internal memory, capacity 118 photos).
- Display videos of door panel calls/cameras and delete videos (Micro-SD card required, using this card cancels
the photos option).
- Calls received log.
- Do not disturb mode (door panel or intercom calls are not received).
- Divert call (GSM-GB2 module required).
- Setup: ring tone, call volume, auto switch-on time, rename door/camera, time and date.
- Language selection (Spanish, English, French, Portuguese or Dutch).
Installer menu:
- Monitor as master or (slave 1, slave 2 or slave 3). Up to 4 monitors per apartment.
- Surveillance monitor.
- Allow the door panel image to be displayed on the slave monitor during a call.
- Activate intercom calls between apartments.
: (during auto switch-on or communication).
Screen and volume settings menu
- Scene: Normal, bright, soft or user
.
image
- Brightness, contrast and colour.
- Monitor speaker volume.
- Start / stop communication capacitive touch switch. In standby it also displays the door panel image.
- Menu access capacitive touch switch.
- Door release activation capacitive push button.
- Different ring tones indicate the origin of the call (door panel, intercom or apartment door).
- Dip switches for setting the monitor address (call code).
- Input for calls from the landing door.
- Call repeater output (SAR-12/24).
SYSTEM OPERATION
-
coustic tone will be heard confirming the call is in
To make a call, the visitor must press the button of the apartment; an a
progress once the push button has been pressed
the
and
LED
will turn on. If vocal synthesis is activated then a “call
is in progress
be heard confirming the call
in progress
”
message will
is
. At this moment the apartment's monitor
receives the call During the call the visitor can correct his call by pressing a push button corresponding to a different
.
apartment, in which case the original call is cancelled.
-
call lasts
The
for 40 seconds. Without alerting the visitor, their image appears on the master monitor during this time. To
view the picture on a slave monitor this function must first be activated in the monitor
the image
kit
application
. For
villa
:
appears on the monitor (with
code 0
“
apartment 1
”
or monitor with
code 16 if the call is in
“
apartment 2
”
)
address
address
when receiving the call without the visitor being alerted.
If the call is not answered within 40 seconds, LED
will turn off and the channel will be freed.
- To establish communication, press the monitor's push button
and the door panel's LED
will turn on.
If the vocal
synthesis is enabled the message
“
you can speak now
”
will be Heard confirming the communication is activated.
-
.
Communication will last for one and a half minutes or until the push button
is pressed again When communication
has finished, LEDs
will turn off and the
will be freed. If vocal synthesis is activated then a
system
and
“
c
finished
”
message will
ommunication is
be heard in the door panel confirming the communication has finished.
- To open the door press the
push button during the call or communication processes: one press will activate the
door release for five seconds and LED
will also turn on for five seconds. If vocal synthesis is activated then a
“
door
is open
”
message will be heard in the door panel.
-
.
The descriptions of the function push buttons are found on page 4
3
THERA G 2
B MONITOR