4.
To exit programming mode, press and hold the button
for more than 5 seconds, 2 long tones are emitted and the
status LED will turn off confirming exit from programming mode.
1.
Press and hold the button
for more than 5 seconds: t emits 3 short tones and the slow blinking of the status LED
i
(yellow) confirms entry into programming mode. In all cases, after 10 minutes elapse, the device exits programming
mode and the modified parameters are saved.
14
OPTIONAL PROGRAMMING (ADDITIONAL MONITOR FUNCTIONS)
TEKNA GTWIN MONITOR
Intercom function in the same apartment:
Without picking up the handset.
Press the button (A, B or C) to be programmed for at least 3 seconds until the confirmation tone sounds.
2.
BEEP
A
B
C
BEEP
A
B
C
C1
C1
A
B
C
A
B
C
BEEP
BEEP
C2
C1
To programme a monitor/telephone (internal device C1) to call another monitor/telephone (device C2) in the same
apartment:
3.
Go to the monitor/telephone (device C2) that has to call the button to be programmed in
and press the door
Step 2
release button. The monitors/telephones (device C1 and C2) emit a completed programming beep.
Continued overleaf
