golmar Nexa Modular, Assembly Manual

Page: 8 / 12

fix the door panel in the embedding box with the supplied screws.
lose the door panel.
C
ouble door panel assembly.
D
Assembly the door panel A (step 1 ), as it is described in page 26 "Door panel assembly". Bear in mind
that the rod that will join the door panel A and door panel B have to be of the type door panel UNE
rod, see picture below.
Insert a header between door panel UNE rod and the second lateral rod (at the bottom part) and fix it
with the supplied screws (step 2
) then insert the module (step 3 ). If the door panel is more than one
module insert first the lower module.
Place the spacer module (step 4 ) and insert the next module (step 5
). Repeat this procedure in case of
doo r panel s with one more module (the maximum numbe r o f module s placed verticall y i s three).
To finish insert the last header between door panel UNE rod and the second lateral rod (at the top part)
and fix it with the supplied screws (step 6
).
2,9 x 13
DIN-7981
Lateral Rod
A
Door panel
UNE Rod
A
B
5
1
2
4
3
6
Door panel
UNE Rod
2,9 x 13
DIN-7981
IMPORTANT: Once finished the adjustments, stick the adhesive gasket (that it is supplied with the set
of closing heads N60XX CMPL) in the . door panel UNE rod
Lateral Rod
Lateral Rod
Door panel: Double door panel:
Finish the door panel assembly by placing the closing heads, put the head on one side and then
make a slight pressure on the other end, to its correct placement.
DOOR PANEL INSTALLATION DOOR PANEL INSTALLATION
27
28