3
ART 7AW/G+
IP G+
www.golmar.es
20-09-2017
Wed
Intercom
Events
App
Settings
09:27
View
Status leds
Speaker
- TCP/IP video intercom system.
- Installation in an existing network structure (requires the addition of D4L-G+/PoE switches) or in its own structure using fibre or
UTP cable of category 5 or higher.
- Up to 98 blocks for each installation.
- Up to 19 door panels for each block.
- Up to 799 apartments for each block.
- Up to 19 general gurad units for installation and 9 gurad units for each blockl.
- Up to 32 IP cameras with ONVIF protocol,
2. CHARACTERISTICS
- The installation and handling of this equipment must be carried out by
authorised personnel
only
.
.
- The current regulations require the feeder to be protected with a circuit breaker.
- The entire installation must travel at least 40 cm
from any other installation
.
- In the power supply (FA-G+):
- Do not over-tighten the screws of the terminal strip.
- Install the power supply in a dry and protected place, without risk of dripping or splashing water.
- Avoid locations near heat sources, damp or dusty.
- Do not block the ventilation slots so that air can circulate freely.
- To avoid damage, the power supply must be firmly anchored. Usea a DIN 46277 guide for fixing (8 DIN).
- To avoid electric shock, do not remove the cover or handle the wires connected to the terminals.
1. SAFETY CAUTIONS AND WARNINGS
3. DEVICE DESCRIPTION
- Front side
DUAL
POE
MONITOR IP 7”
ART 7AW/G+
12310720
GOLMAR S.A.
C/ Silici, 13
08940 - SPAIN
DUAL
POE
48V
18V
12V
GND
PCM IN
HZ+ HZ-
RJ45
PCM OUT
FPOE
SPOE
AL5
AL6
AL7
AL8
GND
GND
COM1
NO1
COM2
NO2
AL1
AL2
AL3
AL4
SA
GND
12V OUT
GND
485+
485-
- Back side
Microphone
RJ45 connector.
Alarm input connectors.
HZ(**)
(*) Makes reference to the doorbell of the house.
12V local power connector..
PCM/G+ connector
Power mode selector
jumper.