golmar 50121601, Instruction Manual

Page: 7 / 15

7
CONFIGURATION
Dip-switches Sw1 and Sw3
1 2 3 4
RAP-5130 RAP-8415 RAP-4130
OFF OFF OFF OFF
ON OFF OFF OFF
OFF ON OFF OFF
ON ON OFF OFF
OFF OFF
ON OFF
OFF ON
ON ON
OFF OFF
ON OFF
OFF ON
ON ON
OFF OFF
ON OFF
OFF ON
ON ON
OFF
OFF
OFF
OFF
ON
ON
ON
ON
ON
ON
ON
ON
OFF
OFF
OFF
OFF
ON
ON
ON
ON
ON
ON
ON
ON
100 m. 100 m. 100 m.
150 m. 350 m. 350 m.
350 m. 750 m. 750 m.
500 m. 1100 m. 1100 m.
700 m. 1500 m. 1500 m.
850 m. 1850 m. 1850 m.
1000 m. 2250 m. 2250 m.
1200 m. 2600 m. 2600 m.
1500 m. 3350 m. 3350 m.
1650 m. 3700 m. 3700 m.
1850 m. 4100 m. 4100 m.
2000 m. 4400 m. 4400 m.
2200 m. 4850 m. 4850 m.
2350 m. 5200 m. 5200 m.
2550 m. 5600 m. 5600 m.
2700 m. 5950 m. 5950 m.
Cable / Length
Golmar cable (capacitance):
RAP-5130 cable: 10 nF/100 m.
RAP-8415 cable: 4,5 nF/100 m.
RAP-4130 cable: 4,5 nF/100 m.
Coming from previous page
With the Sw2-5 switch set to ON (separator mode with capacitance compensation), it allows to
compensate the increase in the capacitance of the audio line, due to installations where there are
large distances (summation) of installed cable.
The dip-switch Sw3 compensates the audio line (capacitance) connected in the Bus 1 (A1) of the
repeater. Depending on Golmar cable used and the length (summation) of installed cable in the
Bus 1 (A1) of the repeater, set the switches, as it is shown on the following chart.
The dip-switch Sw1 compensates the audio line (capacitance) connected in the Bus 2 (A2) of the
repeater. Depending on Golmar cable used and the length (summation) of installed cable in the
Bus 2 (A2) of the repeater, set the switches, as it is shown on the following chart.
Dip-switches Sw1 and Sw3:
All manuals and user guides at all-guides.com