[Slope ON]
[Slope OFF]
• Press the mode button for 5 seconds to turn ON/OFF slope. When the slope is ON,
the distance adjusted for the elevation difference is displayed at the top, and
the straight line distance and the elevation difference are displayed at the bottom.
When the slope is OFF, only the straight line distance is displayed at the top.
※ The Focus Circle is activated when
the Power/ Measurement button is clicked.
Deactivate the focus square before changing
the mode.
slope-adjusted
distance
Straight
Distance
Straight
Distance
Height of
the Target
▶ How to turn ON / OFF Slope
▶ Setting Focus (adjusting diopter dial)
• Use the viewfinder to aim and turn the diopter
dial until you can see the target clearly.
• With the click of Mode Button, the mode changes in the following order
: Standard → Scan → Standard.
• When measuring, Slope ON: Green LED ON / Slope OFF: Red LED ON
• Mode can be changed only when the targeting crosshair is on display.
(Mode change unavailable when the focus square is active).
▶ Mode Setting [2 Modes]
