6.
Place long arms onto the servo’s you are planning to use for the elevators.
7.
Fit the pushrod in place remembering one end is reverse threaded. Set it so the arm is centered and
the elevator is flat. Choose the holes depending on how much deflection you require.
8.
There is an option to use one servo or two servos for the elevator. If using one servo, the 2 parts of the
elevator need to be connected by the fiberglass block with glue as shown below. The picture is for
illustration only. The connection of the 2 parts needs to be performed inside the fuselage. Glue the
Summary of Contents for SBACH342 120E
