19
THE INFORMATION MODE
The console features an information mode that allows
you to view treadmill usage information, select a sys-
tem of measurement for the console, and turn on and
turn off the demo mode. The information mode also al-
lows you to adjust the settings of the television and to
save channels into the television’s memory.
Follow the steps below to use the information mode.
1. Hold down the Stop button while inserting the
key into the console.
When you select the information mode, the lower
part of the screen will show the total number of
miles or kilometers that the walking belt has moved
(Distance) and the total number of hours that the
treadmill has been used (Time).
In addition, the center of the display will show the
word “English” for English miles or the word “Metric”
for metric kilometers. Press the Speed + button to
change the unit of measurement if desired.
IMPORTANT:
The console features a display
demo mode, designed to be used if the treadmill is
displayed in a store. While the demo mode is
turned on, the console will function normally when
you plug in the power cord, switch the circuit
breaker to the reset position, and insert the key
into the console. However, when you remove the
key, the displays will remain lit, although the but-
tons will not function.
If the words “Demo On” ap-
pear in the display when the information mode
is selected, press the Speed – button so the
words “Demo Off” appear.
2. Press the TV button and adjust the brightness,
contrast, color, sharpness, and/or hue of the
television.
When you press the TV button, the brightness level
indicator will appear on the television screen. Press
the Volume buttons to adjust the brightness setting if
desired.
Next, press the Channel buttons until the contrast,
color, sharpness, or hue level indicator appears.
Adjust the settings, if desired, by pressing the
Volume buttons.
3. Press the TV button again and add or delete
channels.
After all valid channels available in your area have
been saved into the television’s memory (see step
5 on this page), you can manually add channels or
delete unwanted channels.
To add or delete a channel, first press the Channel
buttons until the desired channel number appears
on the screen. Then, press the Volume increase
button to add the channel, or the Volume decrease
button to delete the channel. Continue this process
until you have added all desired channels and
deleted all unwanted channels.
4. Press the TV button again and select an an-
tenna connection or a cable connection.
After you press the TV button, press the Volume
decrease button to select the Antenna setting, the
Volume increase button to select the Standard
Cable setting, the Channel decrease button to se-
lect the Cable IRC setting, or the Channel increase
button to select the Cable HRC setting. If you have
connected an antenna to the treadmill, the Antenna
setting should be selected. If you have connected
a CATV cable, one of the three Cable settings
should be selected; try all three Cable settings, if
necessary, to find the optimal setting.
5. Press the TV button again and save channels
into the television’s memory.
When you press the TV button, the television will
begin scanning all of the channels available in your
area. When no broadcast signal is detected on a
channel, the channel will be skipped. When a
broadcast signal is detected, the channel will be
saved into memory and the next channel will be
selected. This process will continue until the high-
est channel is reached.
Do not remove the key
while the television is scanning channels.
6. When you are finished using the information
mode, remove the key.
To exit the information mode at any time (except
while the television is scanning channels), remove
the key from the console.
